Double-Cap Rivet Tools

Item Number: 750T UPC: 072879294255 Categories: ,

The Dritz Double-Cap Rivet Tools include a hole punch, anvil and setter and are used to apply Dritz Double-Cap Rivets. For use with Dritz Double-Cap Rivets 750-33, 750-38 and 750-65, sold separately.

  • Includes a 3-piece set of tools: hole punch, anvil and setter
  • For use with Dritz Double-Cap Rivets 750-33, 750-38 and 750-65
  • Rivets are sold separately

Quantity: 3 PC

Color: Nickel

Test a rivet on scrap of material being used to check that application will be suitable for intended use.

1. Mark position of rivet on top and bottom side of material layers.
2. Working on a very firm, protected work surface, position tip of hole punch on marked position and hammer with rubber mallet. Continue hammering until hole is punched through all layers. Note: Use an awl for materials that are difficult to cut with hole punch tool. Hole should only be large enough for the rivet post to pass through.
3. Insert post of rivet into hole from right to wrong side of fabric.
4. Place cap over rivet post and snap into place. Cap will be loose.
5. Position rivet on concave side of anvil; place concave end of setting tool over cap.
6. Holding setting tool straight and firmly at the base, gently hammer the two caps together.

You can find this product in these various stores. Please note, we are unable to check product availability in stores, so please call or check the store's website before attempting to purchase.

Find Your Nearest Store

Find Your Nearest Store

Find Your Nearest Store

Dritz is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com